How To Install Clockwokmod Recovery On Tecno Phantom 5

4
413

An Android smartphone without custom recovery installed is not yet a complete Android device, Why? Because custom recovery mode such as Clockwokmod (CWM), TWRP & Philz Touch recovery is an advanced environment which has powerful advantage over device stock recovery mode. An Android device with installed custom recovery can enable its user have Administrative control over its device, e.i, Installation of Custom roms, flashable zip files, making of whole device backup (Nandroid backup), etc. Which can’t be done on stock recovery mode. In this article, I’ll be guiding all users of Tecno Phantom 5 on how to install Clockwokmod recovery on your device using Sp Flashtools.

HOW TO INSTALL CLOCKWOKMOD (CWM) RECOVERY ON TECNO PHANTOM 5

REQUIREMENTS:


★ PC/Laptop Running Windows.
★ Working USB Cable
★ SP FlashTools. Download Here

★ ADB VCOM Drivers (normally I use PDAnet). Go here to learn how to install Mediatek Vcom Drivers to your pc or you can also plug your Android to your PC to auto detect and install needed drivers. But if your phone drivers was not installed after plugin your device, then goto that link page or download and install Pdanet to your pc and follow the onscreen setup to install your device needed drivers

★ Scatter file and Custom Recovery.img for Tecno Phantom 5. Download Here
★ Little patience.

Step 1:  First download the custom recovery zip file from above link, and then extract the “Recovery.img” and “MT6753_Android_Scatter.txt” file to another folder in your PC

Step 2:  Download and extract Sp flashtools to another folder in your PC. It should look like below image
Step 3:  Launch SP “Flash Tools.exe” from among the files as seen in first image and click “Scatter Loading”.
http://miahtek.blogspot.com/2015/12/how-to-install-custom-recovery-img-on.html
Step 4:  Now locate the custom recovery folder you extracted and select the scatter file of your device (MT6XXX_Android_Scatter.txt) and click on “Open”.
http://miahtek.blogspot.com/2015/12/how-to-install-custom-recovery-img-on.html
Step 5:  You should see below image from your Sp flashtools. Make sure only “Recovery” is checked, uncheck others.
http://miahtek.blogspot.com/2015/12/how-to-install-custom-recovery-img-on.html
Step 6:  Now, click “RECOVERY” from the list. A new window will pop up, find the recovery image for your phone that you want to flash or install and click Open.
Step 7:  Now, TURN OFF your android phone completely. When it is off, click the “DOWNLOAD” button on the SP FlashTools. After that, connect your Switched-OFF phone to your computer using USB Cable and allow the flashing proceedure to do its thing.
After successfully flashing your custom recovery img, you will see a green “OK”. That’s it, your phone is now running Clockwokmod custom recovery img. Now unplug your device, press and hold Volume up + Power button to boot to recoveey mode.

READ  Easily Download Movies & TV Shows On Showbox Using ADM (Advance Download Manager)

Was that difficult? I don’t think so. If you have any question, feel free to ask via the comment box below. Hit the share button below to share this article with your friends…

4 COMMENTS

LEAVE A REPLY

Please enter your comment!
Please enter your name here