How To Root Innjoo Max 2

0
160
To all handlers of Innjoo Max 2  who has been trying or attempting to gain root access and also looking for a suitable custom recovery to install on their device only to end up with a failed attempt. Here is a confirmed, working and reliable guide to finally root your Innjoo Max 2  and enjoy the benefit of a rooted and custom recovery installed Android.

Techvillaz How To Root Innjoo Max 2

In this article, I’ll be guiding you on how to install TWRP recovery mode on your Innjoo Max 2  and also how to root Innjoo Max 2  afterwards.

Before we proceed, I’ll love to give credit to Team Hovatek for porting the TWRP recovery image which we will be using in this guide..


Requirements:

→ PC/ Laptop running windows
→ SP Flash tools. Download
→ SuperSu.zip. Download

→ VCOM drivers. (Installation Guide).  You can also plug your device to your pc to auto detect and install needed drivers or download and install Pdanet from here to install your device needed drivers.
→ TWRP recovery img and scatter file for Innjoo Max 2. Download
→ Working USB cable
→ A little patience
How To Install TWRP Recovery On Innjoo Max 2 Plus
Step 1: First download the recovery zip file from above link and then extract the “Recovery.img” and “MT6580_Android_Scatter.txt” file to the desktop screen of your computer or create a folder and extract to it, as seen in the image below.
Techvillaz How To Root Innjoo Max 2 Plus

Step 2: Next, download SP Flashtools and extract the files to another folder on your computer. You should get the following files as seen below after extraction.
Step 3: From the extracted files, open “Flash_tool.exe”
Step 4: Once the flash tool is launched, then click on “scatter loading” button.
Step 5: Now, locate the “MT6580_Android_Scatter.txt” file, which you extracted and open. you should be seeing below image afterward. Tick on “Recovery” only and uncheck others.
Step 6: After that, click “Download” button
Step 7: Immediately, switch off your device completely and connect your device to your computer via USB cable
Step 8: The Flashing process would be in progress, and a Green button would appear once the process is completed.
That’s it. ClockwokMod Recovery is now installed on your Innjoo max 2 plus device. To boot to recovery mode, simply press and hold Volume Down button + Power button for 5sec. Now lets proceed to rooting Innjoo max 2dd4dc4.


READ  How To Root Infinix Note 2 x600

How To Root Innjoo Max 2

Step 1:  Firstly, download the SuperSU file from here, and move the downloaded file to the internal/ external storage of your device
Step 2:  Now, switch off your device and boot to recovery mode (press and hold Volume Down button + press Power button).
Step 3:  In TWRP, if you get a prompt asking you to swipe to allow TWRP modify the system partition, then go ahead and swipe. To swipe, place your finger on the green circle then slide it to the right

Step 4:  In TWRP recovery, tap Install and Navigate to the location of the SuperSU.zip and select it 

Step 5:  Swipe to confirm flashing of SuperSU.zip and wait till flashing is complete and reboot the phone normally

That’s it, your device has now gotten root permission. You can download Root Checker from playstore to verify root.
Hit the share button to share this article with your friends… Your comment is welcome.

LEAVE A REPLY

Please enter your comment!
Please enter your name here